How do you check the clutch dmf flywheel on seat altea?

How do you check the clutch dmf flywheel on seat altea?
Dual Mass Flywheel Pre-fitting Checks
It is essential that you check the DMF/DFC (the procedure is the same for both) during every clutch replacement - if you fit a new clutch to a worn DMF/DFC, the flywheel will completely destroy it. If the clutch is making any unexplained noises, vibration or intermittent clutch slip it could be caused by a worn DMF. Pre-fitting Testing Procedure 1. Listen for... - Rattles and clonks during enginie start up or turn off.
- Excessive gear rattle
- Unusual noises 2. Check the clutch for... - Driven plate damage
- Driven strap damage 3. With the flywheel still fitted... Rotate the inner mass by hand anticlockwise and mark the flywheel then rotate it clockwise and measure the travel. REPLACE if the movement is:- Less than15mm or- More than 30mm 4. Check the bearing play... Rock the inner mass from side to side. REPLACE if movement is:- More than 2mm for passenge- More than 4mm for light side to side Do you have the correct part?